Sans Frais: 1-(855) 508-2150
Local: (450) 508-2150Ouvert au public 9am-5pm Lun-Ven (Blainville, QC)


 Smile BIENVENUE SUR NOTRE NOUVEAU SITE  WEB AMÉLIORÉ !! 

Projecteur Sanyo PLC-XW250
Seconds: 4


Projecteur Sanyo PLC-XW250

Print This Item

XGA (1024x768), 2600 Ansi Lumens 5.5 lbs. Projector
Compact Size and easy set up make this idea for mobile and classroom applicates

Introducing the PLC-XW250 and the PLC-XW200 – that offer educators outstanding cost performance with an eco stand-by power mode that uses a mere 0.4 watts and their exclusive “Easy Setup Function”. These projectors are extremely easy to operate and offer advanced features such as wired LAN management – making them perfect for educators.

Using a mere 0.4 watts, the PLC-XW250 and the PLC-XW200 are SANYO's most ecological data projectors. The eco power stand-by mode saves about 80% of the energy that is consumed by similar previous SANYO projectors*. By redesigning the electrical circuits, these two projectors are able to comply with the EuP-Directive Lot 6 and the EU RoHS Directive. As an additional environmental measure, all the packaging contains pulp molds, which can be recycled as used paper.

Both projectors incorporate SANYO's latest “Easy Setup Function”, which include Auto Input Signal Search, Auto Vertical Keystone Correction, and an Input Guidance Function. The Auto Input Signal Search automatically detects the input signal and makes the necessary internal settings. The Auto Vertical Keystone Correction function automatically detects its position angle and corrects for any image distortion. And finally, the Guidance Function displays on-screen connection instructions when there is no input signal detected, enabling easy setup for expert users and novices alike.

Using the supplied wired LAN terminal (RJ-45), the PLC-XW250 and PLC-XW200 can be controlled and managed via network connection. The LAN connection offers settings for power on/off, switching input signals, projecting from a remote location, as well as for monitoring lamp conditions and usage time. An automatic maintenance notification function sends notices to preset email addresses in the event of projector problems, resulting in faster maintenance response time. Using SANYO’s PJ Network Manager software, it's possible to centrally monitor operating conditions of up to 200 projectors on a single network, reducing multiple projector management time.

Specifications
Model name PLC-XW250 PLC-XW200
Panels 0.55-inch TFT p-Si x 3
No. of pixels 2,359,296 (1024 x 768 dots)
Projection lamp 220 W UHP
Brightness*1 2600 lm 2200 lm
Contrast*1 500 : 1 (Lamp mode: "High" & Image mode: "Dynamic")
Uniformity*1 85% (corner to center)
Projection lens F2.0 - 2.15, f= 18.38 - 22.06 mm(0.72 - 0.87 inch)
    Screen size 40" - 300", 1.3 m(wide)-11.8 m (tele)(4.3 - 3.87 ft), U:D = 6:1
    Zoom / Focus 100" at 3.3 m - 3.9 m(10.8 - 12.8 ft),1 : 1.2 Manual driven
SD/HDTV signals 480i, 480p, 575i, 575p, 720p, 1035i, and 1080i
Color systems PAL / SECAM/ NTSC / NTSC4.43 / PAL-M/N
Video Signal Composite, S-Video, Component
Computer Terminals D-sub 15 x 1 : Analog RGB Input
(Component and S-video input with conversion cable)
D-sub 15 x 1 : Analog RGB Input or Monitor out*2
Video terminals RCA x 1 ; Composite video
Computer compatibility UXGA / WXGA / SXGA+ / SXGA / XGA / SVGA / VGA / MAC
Audio Mini-Jack (stereo) x 1 : Input (for Computer & Video)
Mini-Jack (stereo) x 1 : Output(variable audio out)
Communication Terminals RJ-45(LAN) D-sub 9pin (RS 232C)
Presentation Tools Freeze / Digital Zoom / No Show / etc.
Other Features Progressive, 3-2 & 2-2 pull down, User Logo
Scanning frequency H sync: 15 - 100 kHz, V sync: 50 -100 Hz,
Dot clock: 140 MHz
Sound output 1.0W Mono
Fan Noize 29dBA (Lamp mode "Eco")
Voltage AC 100 - 120V, AC200 - 240V, 50/60Hz
Power
consumption
100-120 V 213 W / 273 W / 296 W
(Eco / Normal / High)
212 W / 229 W / 272 W
(Eco / Normal / High)
200-240 V 205 W / 260 W / 280 W
(Eco / Normal / High)
203 W / 229 W / 259 W
(Eco / Normal / High)
Standby power
consumption
100-120 V 0.4 W (Standby mode: Eco)
200-240 V 0.7 W (Standby mode: Eco)
Dimensions
(not including protruding parts)
W333.5 x H85.2 x D247.0 mm (H13.1 x H3.4 x D9.7 inch)
Weight 2.5 kg (5.5lbs)
Accessory Quick reference guide, Owners's manual (CD-ROM),CD-ROM read me note,
CD-ROM(PJ-Net Manager application software), PIN code Label,
Lamp replacement label,UL cable card, Power cord,
Computer cable(Dsub15 - Dsub15), Remote control, AAA Battery x 2,
Lens cap, Strap for lens cap


Appréciation des Utilisateurs
Appréciation du Produit: (0 appréciation(s)) Poor Fair Good Very good Excellent!
Commentaires sur produit: (0 commentaire(s))