Promo!

Accuphase E-650 (REPRISE)

UGS : E650

Original price was: 15 000,00 $.Current price is: 8 250,00 $.

Seulement 1 en inventaire

Description

-REPRIS EN ÉCHANGE, BALANCE DE GARANTIE DE 2 ANS

-CONDITION IMPECCABLE, INCLUS BOITE ET ACCESSOIRES ORIGINAUX

-DATE DE VENTE INITIALE : JANVIER 2024

Innovative engineering and top-grade parts and materials come together in this product featuring the
superb Balanced AAVA type volume control and a triple parallel arrangement of power MOS-FETs in
the output stage. The power amplifier section employs the latest instrumentation amplifier configuration
for balanced signal transmission, resulting in an integrated amplifier with fully balanced configuration
from the inputs right through to the output. The massive power supply and low-impedance output
circuitry deliver 150 watts per channel (into 1 ohm, with music signal) and a damping factor of 800.

  • First integrated amplifier featuring Balanced AAVA volume control
  • Pure Class A operation(30 watts into 8 ohms)
  • Guaranteed linear power: 120 watts into 2 ohms, 60 watts into 4 ohms,30 watts into 8 ohms
  • Output stage with power MOS-FETs in triple parallel push-pull configuration
  • Instrumentation amplifier principle in power amplifier for fully balanced signal transmission, complemented by MCS+ topology and current feedback amplification circuitry
  • Strong power supply with massive high-efficiency transformer and large filtering capacitors
  • Preamplifier and power amplifier sections can be used separately
  • Numeric indication of volume level

Rated Continuous Average Output Power (both channels operating simultaneously, 20 – 20,000 Hz)
150 W/ch 1-ohm load (*)
120 W/ch 2-ohm load
60 W/ch 4-ohm load
30 W/ch 8-ohm load
Note: *1-ohm operation possible with music signals only.

Total Harmonic Distortion (both channels operating simultaneously, 20 – 20,000 Hz)
0.05% 2-ohm load
0.03% 4 to 16 ohm load
Intermodulation Distortion 0.01%
Frequency Response HIGH LEVEL INPUT
At rated continuous average output: 20 – 20,000 Hz +0, –0.5 dB
MAIN IN
At rated continuous average output: 20 – 20,000 Hz +0, –0.2 dB
At 1 watt output: 3 – 150,000 Hz +0, –3.0 dB
Damping Factor 800 (with 8-ohm load, 50 Hz)
Input sensitivity
and impedance
Output Voltage and Impedance
PRE OUTPUT 0.617 V 50 ohms
(at rated continuous average output)
Gain HIGH LEVEL INPUT → PRE OUTPUT: 18 dB
MAIN IN → OUTPUT: 28 dB
Tone Controls Turnover frequency and adjustment range
BASS: 300 Hz ±10 dB (50 Hz)
TREBLE: 3 kHz ±10 dB (20 kHz)
Loudness compensator +6 dB(100 Hz)
Attenuator ─20 dB
S/N Ratio,
Input-converted Noise
Bar graph meter Represents output voltage value (dB) using 26 points
With meter on/off switching function
Output Load Impedance 2 to 16 ohms
Stereo Headphones Suitable impedance: 8 ohms or higher
Power Requirements 120 V/220 V/230 V AC, 50/60 Hz
(Voltage as indicated on rear panel)
Power Consumption 168 W idle
290 W in accordance with IEC 60065
Maximum Dimensions Width 465 mm ( 18.31″)
Height 191 mm ( 7.52″)
Depth 428 mm ( 16.85″)
Mass 25.3 kg (55.8 lbs) net
32.0 kg (70.6 lbs) in shipping carton