Anthem MRX 720

– Canaux : 7.2 (11.2 Pré-Amp)

– Puissance : 140w Par Canaux

– Full 4K/HDR HDCP 2.2

– Dolby Atmos/Auro-3D/DTS-X

– Anthem Room Correction 

UGS : MRX720 Catégories : ,

Description

Spécifications

PREAMPLIFIER
Maximum Output (<0.1% THD)4.2 Vrms, subwoofer channel 5.2 Vrms
Frequency Response (2 Vrms output)10 Hz — 31 kHz (+0, -0.25 dB)
Frequency Response, Analog-Direct (2 Vrms output)10 Hz — 48 kHz (+0, -0.25 dB)
THD+N (2 Vrms output)-95 dB
S/N Ratio (2 Vrms output, IEC-A filter)110 dB
PREAMPLIFIER + AMPLIFIER (1 W OUTPUT)
MRX 1120 / MRX 720-88 dB channels 1-5, -75 db back/height
MRX 520-88 dB
SPEAKER IMPEDANCE
Compatible with 4 Ohms or higher impedance.
MAXIMUM CONTINUOUS OUTPUT (1% THD)
MRX 1120MRX 720MRX 520
Channels 1-5, Two Driven into 8 Ohms140 W140 W100 W
Channels 1-5, Two Driven into 6 Ohms170 W170 W130 W
Remaining Channels, Two Driven into 8 Ohms60 W60 Wn/a
Remaining Channels, Two Driven into 6 Ohms75 W75 Wn/a
POWER CONSUMPTION
MRX 1120MRX 720MRX 520
Typical Load570 W485 W365 W
Standby0.3 W0.3 W0.3 W
Standby IP Control Enabled4.7 W4.7 W2.4 W
Standby HDMI Bypass Enabled8.2 W8.2 W5.8 W
DIMENSIONS
Height6-1/2″ (16.5 cm)
Height with Rackmount Kit4U
Width17-1/4″ (43.9 cm)
Depth (not including power cord)14-3/4″ (37.5 cm)
WEIGHT
MRX 112032 lb (14.5 kg)
MRX 72031 lb (14 kg)
MRX 52028.2 lb (12.8 kg)
POWER REQUIREMENT
120 V version:In countries where the line voltage is 120 V, this product operates from a single phase AC power source that supplies between 108 V and 132 V at a frequency of 60 Hz.
220-240 V version:In countries where the line voltage is 220, 230, or 240 V, this product operates from a single phase AC power source that supplies between 198 V and 264 V at a frequency of 50 Hz.

Informations complémentaires

Poids35 lbs
Marque