Furman Elite 20 PFi

Furman Elite-20 PFi Ultra-Linear Filtering AC Power Source

Protection for 20-amp circuits If you have a heavy-duty 20-amp circuit powering your audio/video system, the Furman Elite-20 PFi is the missing link between the AC wall socket and your gear. Its twelve rear-panel AC outlets can accommodate 20-amp or standard 15-amp AC plugs. To maximize the protection and performance of your system, Furman includes exclusive technologies originally developed to meet the extreme AC power demands of professional recording, film, and broadcast studios.

Continuous power monitoring plus advanced noise filtering The Elite-20 PFi constantly monitors incoming AC, and if it detects a significant overvoltage condition, it automatically shuts off power to all connected equipment. In the case of a sudden voltage spike, many surge suppressors are designed to “take a bullet” and sacrifice internal parts to save your gear. It’s a noble effort, but it leaves your system out of commission while you send the suppressor back to the factory for repair or replacement. Furman’s suppressor circuitry can withstand multiple high-voltage spikes and keep on protecting your gear.

Power Factor Technology: Like a turbocharger for your amplifiers Wide-open dynamics are essential for truly exciting sound. To cleanly reproduce instantaneous peaks or “transients” cleanly, from a cymbal crash to a car crash, an amplifier needs lots of high-current power. During these moments, amplifiers, including those in receivers and powered subwoofers, may require more current than is available from your home’s AC line. Solution? Plug your amplifiers into the Elite-20 PFi’s high-current outlets. Furman’s unique Power Factor Technology creates a “current reservoir” capable of delivering over 55 amps of peak current. Your amplifier gets the current it needs when it needs it most.

See and hear the signal, not the noise The Elite-20 PFi’s wide-bandwidth filtration reduces the AC line noise that can mask subtle ambient sounds and fine picture detail. Twelve AC outlets on the back panel are divided into three banks, to isolate your system’s digital and video circuits from analog components and amplifiers. This helps prevent noise created by one component from affecting the power going to your other plugged-in equipment. These outlets feature hospital-grade connectors that grip your gear’s AC plugs snugly and securely.

Features:

• SMP provides the highest level of protection available.
• LiFT significantly reduces AC line noise.
• E.V.S. protects equipment from dangerous overvoltage conditions.
• Zero ground contamination circuitry protects critical digital components.
• Power Factor Technology provides over 55 Amps peak charge surplus current for power-starved amplifiers.
• Ultrasonic bi-filtering isolates digital and video circuits from analog components.
• Retractable LED lamps illuminate a cabinet or rack full of equipment.
• Detachable module for telco surge suppression and 3 pairs of cable/satellite TVSS isolated F-connectors.
• 12 Volt triggering for remote control.

Specifications:

• Family: Elite Series.
• Line Voltage: 120 Volts.
• Number of Outlets: 13.
• Number of Isolated Banks: 3.

Outlet Descriptions:

• 1 (Ultra-Linearly filtered outlet – front panel).
• 8 (Ultra-Linearly filtered outlets with additional ultrasonic filtering for either video or audio components, 4 with 12V triggering).
• 4 (Power Factor Technology amplifier outlets – 4.5 amps RMS reserve – reactive load – over 55 amps peak charge, 2 with 5-second delay via 12V triggering).
• Rack Mountable: Yes.
• Rack Ears Included: Yes.
• Front Panel Meter(s): No.
• Front Media Light(s): 2 Retractable LED lamps.
• Control: On/Off switch and light dimmer knob on the front panel. 12 Volt triggering for remote control.
• Voltage Regulation: No.
• Compliance: NRTL-C.
• USB Charging: N/A.
• Low Voltage Trigger: 12 V, In/Out.
• Dimensions: 4″ H x 17″ W x 14.75″ D (Standard 2 RU height without feet).
• Weight: 18 lbs.
• Power Consumption: 12 Watts for display and control circuits independent of actual load.

AC Protection:

• AC Protection Technology Extreme Voltage Shutdown.
• Series Multi-Stage Protection.
• Non-sacrificial protection with zero ground contamination.
• Under-Voltage Shutoff: 85V.
• Over-Voltage Shutoff: 140V ±3V.
• Maximum Current Rating: 20 (Amps).
• Initial Clamping Level: 188 VAC peak @ 3,000 Amps.

Filtration: Filtration Technology LiFT.

Filtration Rating:

• Transverse (Differential) Mode:

  • 40 dB from 5 kHz – 100 kHz.

  • 80 dB from 100 kHz – 1 GHz.

  • (Linear attenuation curve from 0.05 – 100 ohms line impedance).
• Common Mode:

  • 40 dB from 10 Hz – 30 kHz.

  • 20 from 40 kHz – 1 MHz.

  • (Linear attenuation curve from 0.05 – 100 ohms line impedance).

Signal Line Protection: 1 Tel 3 Cable/Satellite.

Shipping Info:

• Length: 21.6 Inches.
• Width: 19.7 Inches.
• Height: 8.4 Inches.
• Weight: 22.9 Lbs.