Description
With the ability to provide bass extension and detail typically associated with the largest floorstanding loudspeakers, the Platinum 200 3G achieves an impressively expansive soundstage despite its compact size. The introduction of the new MPD III transducer and RDT III mid-range and bass driver cones has resulted in a speaker with enhanced overall balance, reduced distortion, and the capacity to deliver remarkable room-filling sound. Additionally, it benefits from a new cast outrigger and a plinth assembly with the crossover mounted, further enhancing its performance.
System Format
3-Way
Frequency Response, Free-Field (-6dB)
32 Hz – 60 kHz
Frequency Response, In-Room (-6dB)
23 Hz – 60 kHz
Sensitivity (2.83 Vrms @ 1m, Free-Field)
88 dB
Nominal Impedance
4 Ohms
Minimum Impedance (20 Hz to 20 kHz)
4.0 Ohms @ 2.5 kHz
Continuous Power Handling (RMS into 4 Ohms, Pink Noise with 6dB Crest Factor)
300 W
Recommended Amplifier Power (RMS into 4 Ohm, Music Signal)
150 – 600 W
Bass Alignment
Ported
Port Tuning Frequency
38 Hz
Crossover Frequency
LF/MF: 825 Hz
MF/HF: 3 kHz
Drive Unit Complement
2 x 6″ RDT III bass driver,
1 x 4″ RDT III mid-range driver,
1 x MPD III tweeter
External Dimensions including Trims, Terminals & Outrigger Feet & Spikes (H x W x D)
1041.6 x 368.7 x 454.9 mm (41 x 14.5 x 17.8″)
External Dimensions including Trims, Terminals & Outrigger Feet without spikes (H x W x D)
1025 x 368.7 x 454.9 mm (40.3 x 14.5 x 17.8″)
