PS Audio Sprout100
1 299,00 $
Description
PS Audio Sprout100
To ensure the best possible vinyl reproduction, we engineered a brand-new hybrid circuit design that incorporates a JFET input stage, to lower noise and increase headroom, and a passive high-frequency RIAA circuit, for extended and nuanced high-frequency response. Optimized to the cutting edge of digital playback, Sprout100 also employs an ultra high-resolution ESS Sabre DAC (9016) with USB-B input that accepts resolutions up to PCM 384/24 and DSD128: bit-perfect playback for your high-rez computer audio, video, and gamin applications. An optical (toslink) input allows you to incorporate a TV or other modern digital device with your new system. Bluetooth offers versatility, convenience, and one-touch access to a world of content.
Equiped with bleeding-edge ICEpower amplifier technology, the Sprout100 offers 100 watts per channel, with peaks of up to 135 watts per channel. The Sprout100 also features a built-in subwoofer output (mono RCA, variable), allowing you all the rumble you want with the powered subwoofer of your choosing. With one of the finest headphone amplifiers made, the Sprout100 honors and respects the music with a low-impendance z-feedback circuit that is capable of driving virtually any pair of headphones you can throw at it with perfect transient impulse response. Slewing at an unheard of 1,300-volts/microsecond, the Sprout100’s headphone amp produces lucid spatial detail and acute tonal retrieval.
Specifications
- FULL FEATURED INTEGRATED AMP
- 100 WATTS PER CHANNEL POWER AMP
- ALUMINUM REMOTE CONTROL
- RCA ANALOG INPUTS
- DAC SUPPORTS 384/24 OR DOUBLE RATE DSD
- PASSIVE EQ MOVING MAGNET PHONO PREAMP
- LOW OUTPUT HEADPHONE AMP
- TOSLINK DIGITAL INPUT
- USB INPUT
- BUILT-IN BLUETOOTH RECEIVER
- MANUAL INPUT SELECTOR
- 32Ω: 500mW HEADPHONE OUTPUT
- 300Ω: 125mW HEADPHONE OUTPUT
- OPTIONAL BASS BOOST
- SIGNAL TO NOISE RATIO 100dB AT 4Ω
- THD <0.01% (1W, 1kHz into 4 ohms)
- 6ft REGIONAL POWER CORD
- INDICATOR LIGHT
- 4x BANANA ADAPTERS
- 2x SPROUT DECALS
Weight & Dimensions
- Unit Weight: 2.9 lbs [1.3 kg]
- Unit Dimensions: Width 6.2″, Height 1.9″, Depth 8.2″ (chassis only, not including knobs) or 9.2” (including connectors and knobs)
- Shipping Weight: 5lbs [2.2 kg]
- Shipping Dimensions: Width 10.5″, Height 5″, Depth 14″
Power requirements
- Voltage Options: 100-240 VAC, 50-60Hz, Auto-Detect
- Power Consumption: 280W Maximum
- Mains Power Input: IEC C14
Phono Audio Input
- Connector: 1 Stereo Pair, Phono RCA
- Cartridge type: Moving Magnet
- Cartridge Output: 3mV-10mV (5mV recommended)
- Cartridge Loading: 47KΩ (100pF)
- EQ Type: RIAA
- Gain: +40dB
- S/N ratio: >84dB A-weighted (analog output)
Analog Audio Inputs
- Connector: 1 Stereo Pair, Line Level RCA
- Maximum Input level: 2.1VRMS (+6.44dBV)
- Input impedance: 10KΩ
Analog Audio Output
- Connector: 1 Stereo Pair, Line Level RCA
- Output level, maximum: 3.0VRMS (+9.5dBV)
- Output Max Gain (using Analog Inputs): 8.45dB
- S/N ratio: >105dB (3VRMS ref)
- THD (Analog): <0.01% (1VRMS, 1KHz)
S/PDIF Digital Input
- Connector: Optical (Toslink)
- Format: PCM (96KHz max), 24 bits
USB Input
- Connector: USB “B” Type
- Format: PCM (384KHz max), 24 bits, DSD64 (DoP), DSD128 (DoP)
- Transfer mode: Asynchronous
Bluetooth
- Antenna: Built in
- DAC: Uses Sprout’s built in asynchronous DAC over S/PDIF (ESS Sabre 9016 DAC)
Stereo Power Amplifier Output
- 8Ω loudspeakers connected: 50 watts per channel, both channels driven
- 4Ω loudspeakers connected: 100 watts per channel, both channels driven
- THD (Speaker Output): <0.01% (1W, 1KHz into 4Ω)
- Frequency Response: +/- 1dB (1VRMS out, 20Hz – 20Khz into 4-8Ω)
- Signal to Noise: >100dB at max power into 4Ω
Headphone Output
- 32Ω headphones connected: 500mW
- 300Ω headphones connected: 125mW
- THD: <0.01% (1KHz, 50mW into 32 Ω)
- Signal to Noise: >105dB at max power into 300Ω